Blog

You are currently viewing 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes

2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes

Model No: 124433-A21

  • Best Quality
  • Affordable Pricing
  • On-Time Delivery
  • Customer Satisfaction
request a brochure
request a Quote

Specification for 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes

  • The plate options include both five head holes and three shaft holes.
  • Plates are available for both left and right turns.
  • Fabricated from either titanium or stainless steel.
  • 2.70 mm Locking The Volar Distal Radius Buttress Plate is shaped like the radial column and has a notched tip so it can be placed on the radial styloid next to a K-wire fixation.
  • The plate features both square and round holes. Fixed in place with locking screws in the threaded section and cortical screws in the dynamic compression unit thanks to the inclusion of combi holes.
  • Both 2.7 mm locking screws and 2.7 mm cortical screws can be used in the shaft holes, depending on whether you’re using the compression or threaded section. The plate’s head features locking holes that are compatible with locking screws measuring 2.7 mm in diameter.
  • With the 2.7 mm Locking Volar Distal Radius Buttress Plate, an implant can be placed to treat a specific fracture pattern.
  • A limited-contact surface minimises bone-on-plate contact, protecting the periosteal blood supply.
  • Plates can be of varying lengths, removing the need for cutting.
  • Plate with anatomical contours pre-applied.
  • The minimal plate and screw profile reduces the risk of tendon and soft tissue irritation.
  • Adhesion to the tendon is reduced by the rounded edges.
  • The smaller size of the plates and screws allows for more precise localization of the fractured bone and results in a smaller implant.
  • Locking screws provide a fixed-angle construct to protect the articular surface, lessen the need for bone graft, and achieve fixation in osteoporotic bone.
  • With a locking plate, there is less chance of a screw backing out and the resulting loss of reduction, which improves the overall stability of the structure. Not only does this decrease the likelihood of the screws becoming stripped, but it also reduces the need for precise anatomic plate contouring.
  • The 2.7 mm Locking Volar Distal Radius Buttress Plate is compatible with our full Instruments Set. This plate can be bent using standard instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, bone cutter, bone nibbler, depth gauge, sleeve, screw driver, a trocar sleeve, etc.

uses of 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes

  • The 2.7 mm Locking Volar Distal Radius Buttress Plate is used for the fixation of complex intra-articular and extra-articular distal radius fractures and osteotomies.

Instruments set of 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes

A complete instruments set are also available for 2.7 mm Locking Compression Plate. Instruments can be modified according to the customer’s requirement with minimum quantity required. All these instruments can be used several times.

We are keeping wide range of  instruments items in this set to ensures that Doctors get almost all required items during. Below is list of items of this set.

  • 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
  • 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
  • Counter Sink Copuling Shaft
  • Depth Gauge for 2 / 2.4 mm Screws
  • Depth Gauge for 2.7 mm Screws
  • Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
  • Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
  • Drill Bit 1.8 x 100 mm, Quick Coupling
  • Drill Bit 2 x 100 mm, Quick Coupling
  • Drill Bit 2.4 x 100 mm, Quick Coupling
  • Drill Bit 2.7 x 100 mm, Quick Coupling
  • Hohmann Recator 6 mm
  • Kirschner Wire 1.8 x 150 mm
  • Plate Bender
  • Periosteal Elevator Fiber Handle
  • Plate and Bone Holding Forceps Ratchet Lock-Type1
  • Plate and Bone Holding Forceps Ratchet Lock-Type2
  • Reduction Forcep Pointed Tip Ratchet Lock
  • Reduction Forcep Serrated Tip Ratchet Lock
  • Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
  • Screw Driver Torque for 2.4/2.7 mm Locking Screws
  • Screw Driver Quick Coupling for 2.7 mm Locking Screws
  • Sharp Hook
  • T Handle Quick Coupling
  • Tap for 2.4 mm Screws, Quick Coupling
  • Tap for 2.7 mm Screws, Quick Coupling
  • Graphics Aluminum Box with Silicone Fittings
Send Enquiry

Related Products