Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for LCP Proximal Femoral Type II
- There are 2, 4, 6, 8, 10, 12, 14 and 16 holes available for plates.
- Round and combi holes are present on the plate. Combination holes enable fixing with cortex screws for compression in the dynamic compression unit section and locking screws in the threaded section.
- The two proximal plate holes can accommodate 7.3 mm Locking Cannulated Screws and are threaded.
- The third locking hole has a 5 mm locking cannulated screw thread that it can accept. The need for this screw should be determined during preoperative planning and is dependent on the fracture configuration.
- In the threaded portion of the shaft, 5 mm locking screws are accepted; in the compression portion, 4.5 mm cortical screws or 5 mm locking cancellous screws are accepted.
- Locking 4.5/5 mm Proximal Femoral Plates enable the placement of implants to address specific fracture patterns.
- Reduced bone-to-plate contact and preservation of the periosteal blood supply are benefits of limited-contact surfaces.
- The option to select different plate lengths eliminates the need to cut plates.
- plates made specifically to accommodate the typical femoral neck anteversion on either the left or right femur.
- Segmental fracture patterns can span the entire diaphysis thanks to plate lengths.
- Anatomically, it is contoured to resemble the lateral femoral aspect.
- plates made specifically to accommodate the typical femoral neck anteversion on either the left or right femur.
- available in stainless steel and titanium.
- Locking plates improve construction stability while lowering the chance of screw back-out and subsequent reduction loss. Additionally, it lessens the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- There is a full set of instruments for a 4.5/5 mm locking proximal femoral plate. For this plate, general instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc. are available.
Uses of LCP Proximal Femoral Type II
- 4.5–5.5 mm Locking For femur fractures, including the following, proximal femoral plates are designed.
- fractures of the trochanteric region, including medial cortex fractures in addition to simple, multifragmentary, pertrochanteric, and intertrochanteric fractures.
- ipsilateral shaft fractures in addition to proximal femur fractures.
- The proximal femur has a metastatic fracture.
- surgery on the proximal femur.
- Additionally, a plate may be used for malunions or nonunions as well as for fixing osteopenic bone.
Instruments set of LCP Proximal Femoral Type II
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| LCP Proximal Femoral Type II |
|---|
Product Video
