Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 3-5 mm Locking Pediatric Hip Plate
- Plates available holes are 3 hole in 100° , 150°. and 110°, 4 hole in 120°, 3, 5, 7 hole in 130°
- Plates have both round and combo holes. To put in lock screws Combi holes make it possible to use locking screws in the threaded section and compression screws in the dynamic compression unit section.
- In the threaded part of the shaft holes, you can use 3.5 mm locking screws, 3.5 mm cortical screws, or 4 mm cancellous screws. 3.5mm locking screws for Distal Locking Plates
- 3.5 mm Locking Pediatric Hip Plates allow implants to be placed to treat each fracture pattern.
- The limited-contact surface reduces the amount of bone-to-plate contact and helps to keep the blood supply to the periosteum.
- Reduces the likelihood of both primary and secondary loss of correction due to angular stability. In the majority of older cases, a hip spica is no longer required due to the angular stability.
- Using Kirschner wires to position the initial plate instead of a chisel allows for easy adjustment without causing bony damage, which is a simple and safe surgical technique.
- One off-set is needed for each plate size when using the 3.5mm Locking Paediatric Hip Plate due to the possibility of additional medialization.
- Since plates come in different lengths, you don’t have to cut them.
- Pre-shaped plate to match the shape of the body.
- A low-profile plate design makes it easier to shape.
- Available in Titanium and Stainless steel.
- locking plate makes the structure more stable and reduces the chance of screw back-out and loss of reduction.
- It also cuts down on the need for precise anatomic plate contouring and reduces the chance that screw holes will get stripped.
- For 3.5 mm Locking Pediatric Hip Plates you can get a full set of instruments. General instruments can be used with this plate, such as a Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve, etc.
Uses of 3-5 mm Locking Pediatric Hip Plate
Use for osteotomies of the femur in infants, children, adolescents, and small-framed adults, as well as the fixation of fractures (including pathologic and impending pathologic fractures).
Specific plate indications include:
- Osteotomies for varus, valgus, rotation, and/or shortening.
- fractures of the femoral neck and/or pertrochanteric.
- fractures of the proximal metaphysis.
- fractures of the diaphyses.
- fractures with pathology.
- use as a preventive measure for potential pathologic fractures.
Instruments set of 3-5 mm Locking Pediatric Hip Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 3-5 mm Locking Pediatric Hip Plate |
|---|
Product Video
