Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 3-5 mm Locking Clavicle Hook Plate
- The available holes on the plates are 4, 5, 6, 7, and 8.
- Plates are available in both the left and right directions.
- Plates come in three different hook depths: 12 mm, 15 mm, and 18 mm.
- The plate has both combi and round holes. Combi holes allow for compression fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section.
- In the threaded portion, the shaft holes accept 3.5 mm locking screws, while the compression portion accepts 3.5 mm cortical screws or 4 mm cancellous screws.
- Implant placement with 3.5 mm Locking Clavicle Hook Plates is possible to address the individual fracture pattern.
- Anatomically precontoured, rounded shaft profile reduces the risk of soft tissue irritation between the plate and surrounding soft tissue, the acromioclavicular joint, and the rotator cuff, shaft undercuts reduce blood supply impairment, and a wide range of plates optimise implant selection.
- The limited-contact surface reduces bone-to-plate contact and aids in the preservation of the periosteal blood supply.
- The ability to select different plate lengths eliminates the need to cut plates.
- Plate that has been pre-contoured to fit the anatomical shape.
- Titanium and stainless steel are both available.
- The locking plate improves construct stability by lowering the risk of screw back-out and subsequent reduction loss. It also eliminates the need for precise anatomic plate contouring and reduces the likelihood of stripped screw holes.
- A complete Instruments Set for 3.5 mm Locking Clavicle Hook Plates is available. Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve and other general instruments are available for this plate.
Uses of 3-5 mm Locking Clavicle Hook Plate
- Fixation of lateral clavicle fractures and acromioclavicular joint dislocations.
Instruments set of 3-5 mm Locking Clavicle Hook Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 3-5 mm Locking Clavicle Hook Plate |
|---|
Product Video
