Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 4.5/5 mm Locking Proximal Femoral Plate
- 2, 4, 6, 8, 10, 12, 14 and 16 holes are available in plates.
- There are both round and combi holes on the plate. The threaded section can be fixed using locking screws in combo holes, and the dynamic compression unit section can be compressed using cortex screws in combo holes.
- It is possible to use 7.3 mm Locking Cannulated Screws in the two threaded plate holes closest to the plate.
- In order to accept 5 mm Locking Cannulated Screws, the third locking hole is threaded. The need for this screw should be determined during preoperative planning and is dependent on the fracture configuration.
- The shaft holes can accommodate locking screws up to 5 mm in diameter in the threaded portion, 4.5 mm in the compression portion, or 5 mm in the threaded and cylindrical portions.
- 4.5/5 mm Locking Implant placement is made possible by the proximal femoral plate and can accommodate different fracture patterns.
- The periosteal blood supply is preserved and bone-to-plate contact is decreased by limited-contact surfaces.
- Cutting plates is unnecessary when there is a variety of lengths available.
- specific plates made to accommodate a typical amount of femoral neck anteversion on either the left or right femur.
- Segmental fracture patterns are possible due to plate lengths that span the entire diaphysis.
- The lateral aspect of the proximal femur is roughly approximated anatomically.
- specific plates made to accommodate a typical amount of femoral neck anteversion on either the left or right femur.
- Titanium and stainless steel options are both available.
- By reducing the chance of screw back-out and subsequent reduction loss, locking plates increase construct stability. Additionally, it minimizes the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- The 4.5/5 mm Locking Proximal Femoral Plate is available with a full set of instruments. These general instruments include a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc.
Uses of 4.5/5 mm Locking Proximal Femoral Plate
- Locking 4.5/5 mm Proximal Femoral Plate is designed to treat certain types of femur fractures, such as:
- Trochanteric fractures, including simple, multifragmentary pertrochanteric, reversed or transverse intertrochanteric, and those with additional medial cortex fractures.
- combination of proximal femur fractures and ipsilateral shaft fractures.
- Metastatic proximal femur fracture.
- proximal femur osteotomies.
- Additionally, a plate may be used to fix osteopenic bone as well as non- or malunions.
Instruments set of 4.5/5 mm Locking Proximal Femoral Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 4.5/5 mm Locking Proximal Femoral Plate |
|---|
Product Video
