Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 4.5/5 mm Locking Reconstruction Plate Curved
- 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 and 20 are the available holes on plates.
- There are both round and combi holes on the plate. The threaded section can be fixed using locking screws in combo holes, and the dynamic compression unit section can be compressed using cortex screws in combo holes.
- The shaft holes can accommodate locking screws up to 5 mm in diameter in the threaded portion, 4.5 mm in the compression portion, or 5 mm in the threaded and cylindrical portions.
- Implant placement is made possible by the 4.5/5 mm Locking Reconstruction Plate Curved.
- Compression is possible in both directions thanks to the symmetrical design of the plate holes.
- On the plate, the holes are spaced uniformly. In this way, the presence of a mid-section does not limit plate positioning. In segmental or comminuted fractures, this is especially advantageous.
- The periosteal blood supply is preserved and bone-to-plate contact is decreased by limited-contact surfaces.
- Cutting plates is unnecessary when there is a variety of lengths available.
- Plate with anatomical contours already built in.
- Titanium and stainless steel options are both available.
- By reducing the chance of screw back-out and subsequent reduction loss, locking plates increase construct stability. Additionally, it minimizes the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- There is a full set of instruments for 4.5/5 mm Locking Reconstruction Plate Curved. These general instruments include a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc.
Uses of 4.5/5 mm Locking Reconstruction Plate Curved
- Locking Reconstruction in 4.5/5 mm The Pelvic, Clavicle, and Calcaneal fractures are fixed with Plate Curved.
Instruments set of 4.5/5 mm Locking Reconstruction Plate Curved
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 4.5/5 mm Locking Reconstruction Plate Curved |
|---|
Product Video
