Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 5 mm Locking Pediatric Hip Plate
- 5mm Locking The treatment of proximal femur fractures, rotation osteotomies, and stable fixation of varus and valgus fractures are all covered by pediatric hip plates. 5mm Locking The pediatric hip plates are made with a universal shape that fits both the left and right femur. The proximal portion of the plate has three neck screws, and the distal portion has combi-holes for locking or cortical screws. The following key features of pediatric hip plates guarantee a strong fixation in the bone:
- Three holes per 100°, three holes per 110°, four holes per 120°, three holes per 130°, and three holes per 150° are available for plates.
- Round holes and combi holes are present on the plate. Combination holes enable fixing with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
- The shaft holes can accommodate 5 mm locking screws in the threaded portion, 5 mm cortical screws, or 5 mm locking cancellous screws in the compression portion. Distal locking holes in the plate head are compatible with 5 mm locking screws or 5 mm locking cancellous screws.
- Implant placement is made possible by 5 mm Locking Pediatric Hip Plates in order to address each patient’s unique fracture pattern.
- Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
- Cutting plates is unnecessary if you choose from a variety of lengths.
- Pre-contoured plate to fit anatomical shape.
- obtainable in stainless steel and titanium.
- Locking plate improves construct stability, lowers risk of screw back-out, and prevents ensuing reduction loss. Additionally, it lessens the possibility of stripped screw holes and reduces the need for precise anatomic plate contouring.
- For 5 mm Locking Pediatric Hip Plates, a full set of instruments is accessible. For this plate, general instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc. are available.
- Reduces the risk of primary and secondary loss of correction due to angular stability. In the majority of older cases, a hip spica is no longer required because of the angular stability.
- Simple and secure surgical technique – Initial plate positioning with Kirschner wires rather than a chisel allows easy adjustment without bony damage.
- For 5 mm Locking Paediatric Hip Plates, additional medialization may be possible. If so, only one off-set is needed for each plate size.
Uses of 5 mm Locking Pediatric Hip Plate
- 5mm Locking For the fixation of fractures (including pathologic and imminent pathologic fractures) and femoral osteotomies in infants, children, adolescents, and people of small stature, pediatric hip plates are recommended.
- For plates, specific indications include:
- Osteotomies for valgus, varus, rotation, and/or shortening.
- fractures of the femoral neck or pertrochanteric.
- fractures in the proximal metaphysis.
- fractures of the diaphysis.
- fractures that are pathological.
- use as a preventative measure for potential pathologic fractures.
Instruments set of 5 mm Locking Pediatric Hip Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| Table Title |
|---|
| TH | TH |
|---|---|
| TD | TD |
Product Video
