Model No:T.58
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Orbital Plate Without Gap (Titanium) Introduction, Features, Benefits, Indications, Precautions, Warnings and Surgical Technique
The aim of using the Orbital Plate Without Gap (Titanium) in bone surgery is to fix the broken bones so they fit together right and work well. According to the AO, the key to this kind of treatment is making sure the bones are in the right place, holding them securely, keeping the blood flowing, and encouraging the patient to start moving early.
Orbital Plate Without Gap (Titanium) Features and Benefits
- We have a wide range of Orbital Plate Without Gap (Titanium) in different shapes, sizes, and strengths
- You can choose from seven screw sizes, ranging from very small to regular, including locking screws – 1.5 mm, 2 mm, 2.5 mm, 2.8 mm, 2 mm Locking, 2.5 mm Locking and 2.8 mm Locking
- These plates have smooth edges to avoid causing discomfort to your soft tissues, when needed
- Some plates and screws are thinner where it’s needed
- Emergency screws are available for each screw size, just in case
- Both the plates and screws are made from pure Titanium, a very strong metal
- We use the same tools for all of them, which makes things easier
- These special plates help keep everything stable, reducing the risk of screws coming loose and leading to further problems
- They also mean less need for very precise plate shaping and lower risk of screws getting damaged
Orbital Plate Without Gap (Titanium) Indications
When it comes to selective trauma in the midface and craniofacial skeleton, craniofacial surgery, reconstructive procedures, and selective orthognathic surgery involving the maxilla and chin, this plate is the intended tool for the job.
Specifications
Product Video
Specifications
| Orbital Plate 1.5mm Without Gap (Titanium) |
|---|
| TITANIUM CODE | SIZE |
|---|---|
| T.58.15.06 | 6 Holes |
| T.58.15.08 | 8 Holes |
| T.58.15.10 | 10 Holes |
| T.58.15.12 | 12 Holes |
| Orbital Plate 2.0mm Without Gap (Titanium) |
|---|
| TITANIUM CODE | SIZE |
|---|---|
| T.58.20.06 | 6 Holes |
| T.58.20.08 | 8 Holes |
| T.58.20.10 | 10 Holes |
| T.58.20.12 | 12 Holes |
| Orbital Plate 2.5mm Without Gap (Titanium) |
|---|
| TITANIUM CODE | SIZE |
|---|---|
| T.58.25.06 | 6 Holes |
| T.58.25.08 | 8 Holes |
| T.58.25.10 | 10 Holes |
| T.58.25.12 | 12 Holes |
Product Video
Maxillofacial Instrumentation
| Maxillofacial Instruments |
|---|
| Reference No | Instrumentations |
|---|---|
| MX-INS-01 | Bone Holding Forcep (Pair) |
| MX-INS-02 | 1.5mm Screw Driver With Holding Sleeve |
| MX-INS-03 | 2.0mm Screw Driver With Holding Sleeve |
| MX-INS-04 | 2.5mm Screw Driver With Holding Sleeve |
| MX-INS-05 | Screw Driver Handle with Quick Coupling |
| MX-INS-06 | Maxillofacial Plate Bending Forcep |
| MX-INS-07 | Maxillofacial Modeling Lever |
| MX-INS-08 | Maxillofacial Plier |
| MX-INS-09 | Depth Gauge For Maxillofacial Screw |
| MX-INS-10 | 6mm Hohmann Retractor For Maxillofacial |
| MX-INS-11 | 8mm Hohmann Retractor For Maxillofacial |
| MX-INS-12 | 1.5/2.0 mm Maxillofacial Trocar Sleeve |
| MX-INS-13 | Maxillofacial Plate Holding Forcep |
| MX-INS-14 | 1.2mm Drill Bit 4″ |
| MX-INS-15 | 1.5mm Drill Bit 4″ |
| MX-INS-16 | 1.8mm Drill Bit 4″ |
| MX-INS-17 | Maxillofacial Instrument Box |
| MX-INS-18 | Screw Holding Forcep |
| MX-INS-19 | Maxillofacial Plate Cutter |
| MX-INS-20 | Maxillofacial Plate Tray |
| MX-INS-21 | Maxillofacial Screw Tray with Implant Box |
| MX-INS-22 | Maxillofacial Instrument Box |
