Blog

You are currently viewing 2.7 mm Locking Dorsal Distal Radius Straight Plate

2.7 mm Locking Dorsal Distal Radius Straight Plate

Model No: 124433-A13

  • Best Quality
  • Affordable Pricing
  • On-Time Delivery
  • Customer Satisfaction
request a brochure
request a Quote

Specification for 2.7 mm Locking Dorsal Distal Radius Straight Plate

  • The number of plate holes is between 5 and 6.
  • The choice between Titanium and Stainless Steel is yours.
  • There are both square and round holes in the plate. Combination screw holes (or “combi holes”) permit compression fixation with cortical screws in the threaded section and locking screws in the dynamic compression unit section.
  • Both 2.7 mm locking screws and 2.7 mm cortical screws can be used in the compression and threaded halves of the shaft.
  • Fixation in osteoporotic bone can be achieved with the help of locking screws, which provide a fixed-angle construct to support the articular surface and lessen the need for bone graft.
  • Implant placement can address the unique fracture pattern with the 2.7 mm Locking Dorsal Distal Radius Plate.
  • By minimising bone-on-plate contact, a limited-contact surface protects the periosteal blood supply.
  • Locking 2.7 mm The two-plate dorsal distal radius technique is useful for treating complex distal radius fractures because it provides a stable construct without the need to remove Lister’s tubercle.
  • Since plates can be purchased in a variety of lengths, plate cutting is unnecessary.
  • Plates are shaped like the radial column and have a notched end that rests on the radial styloid, right next to the K-wire that is used for temporary fixation.
  • Because the plate and screws are so thin, they are less likely to irritate surrounding tissues like tendons.
  • The risk of tendon adhesion is reduced by the rounded corners.
  • Miniature plates and screws are used to fix individual fracture pieces while reducing the overall size of the implant.
  • The use of a locking plate improves the structural integrity of the assembly and lessens the possibility of screw back-out and subsequent reduction loss. It also lessens the likelihood of stripped screw holes and the need for precise anatomic plate contouring.
  • The 2.7 mm Locking Dorsal Distal Radius Plate is compatible with the full Instruments Set. This plate is compatible with a wide variety of standard instruments, including plate bending presses, plate holding forceps, plate bending pliers, bone elevators, bone cutters, bone nibblers, depth gauges, sleeves, screw drivers, trocar sleeves and more.

Applications of 2.7 mm Variable Angle Locking Two Column Volar Distal Radius Plate

  • When a small bone needs to be stabilised after a fracture or osteotomy, doctors turn to the 2.7 mm Locking Dorsal Distal Radius Plate.

Instruments set of 2.7 mm Locking Dorsal Distal Radius Straight Plate

A complete instruments set are also available for 2.7 mm Locking Compression Plate. Instruments can be modified according to the customer’s requirement with minimum quantity required. All these instruments can be used several times.

We are keeping wide range of  instruments items in this set to ensures that Doctors get almost all required items during. Below is list of items of this set.

  • 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
  • 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
  • Counter Sink Copuling Shaft
  • Depth Gauge for 2 / 2.4 mm Screws
  • Depth Gauge for 2.7 mm Screws
  • Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
  • Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
  • Drill Bit 1.8 x 100 mm, Quick Coupling
  • Drill Bit 2 x 100 mm, Quick Coupling
  • Drill Bit 2.4 x 100 mm, Quick Coupling
  • Drill Bit 2.7 x 100 mm, Quick Coupling
  • Hohmann Recator 6 mm
  • Kirschner Wire 1.8 x 150 mm
  • Plate Bender
  • Periosteal Elevator Fiber Handle
  • Plate and Bone Holding Forceps Ratchet Lock-Type1
  • Plate and Bone Holding Forceps Ratchet Lock-Type2
  • Reduction Forcep Pointed Tip Ratchet Lock
  • Reduction Forcep Serrated Tip Ratchet Lock
  • Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
  • Screw Driver Torque for 2.4/2.7 mm Locking Screws
  • Screw Driver Quick Coupling for 2.7 mm Locking Screws
  • Sharp Hook
  • T Handle Quick Coupling
  • Tap for 2.4 mm Screws, Quick Coupling
  • Tap for 2.7 mm Screws, Quick Coupling
  • Graphics Aluminum Box with Silicone Fittings
Send Enquiry

Related Products