Model No:
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes
- Plates available holes are 3, 4 and 5.
- Plates available for Left and Right both direction.
- Available in both Titanium and Stainless steel.
- 2.7 mm Locking Volar Extra Articular Distal Radius Plate 5 Head Holes is precontoured for anatomic fit of the volar aspect of the distal radius, so that plate placement is away from the articular surface. Extra-articular volar distal radius plates can be used for simple intra or extra-articular fractures. Diverging screw angles secure the radial styloid and other distal fragments.
- Straight plates are contoured to fit the radial column and have a notched tip that allows them to fit on the radial styloid, adjacent to a temporary K-wire fixation.
- Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
- The shaft holes accept 2.7 mm locking screws in the threaded portion or 2.7 mm cortical screws in the compression portion. Locking holes in plate head accept 2.7 mm locking screws.
- Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
- Smaller plates and screws address fracture fragments individually, with less overall implant bulk.
- Rounded edges minimize potential for tendon adhesion.
- Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
- Choice of different lengths of plate eliminates the need to cut plates.
- Low plate-and-screw profile minimizes potential for tendon and soft tissue irritation.
- Locking screws offer a fixed-angle construct to support the articular surface, reduce the need for bone graft, and obtain fixation in osteoporotic bone.
- locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
- A complete Instruments Set is available for 2.7 mm Locking Volar Extra Articular Distal Radius Plate. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
uses of 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes
2.7 mm Locking Volar Extra Articular Distal Radius Plate 5 Head Holes is used or fixation of complex intra and extra-articular fractures and osteotomies of the distal radius and other small bones.
Instruments set of 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes
Distal Radius Plates Instruments Set
Below are list of items in 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes Instruments Set.
- 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
- 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
- Counter Sink Copuling Shaft
- Depth Gauge for 2 / 2.4 mm Screws
- Depth Gauge for 2.7 mm Screws
- Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
- Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
- Drill Bit 1.8 x 100 mm, Quick Coupling
- Drill Bit 2 x 100 mm, Quick Coupling
- Drill Bit 2.4 x 100 mm, Quick Coupling
- Drill Bit 2.7 x 100 mm, Quick Coupling
- Hohmann Recator 6 mm
- Kirschner Wire 1.8 x 150 mm
- Plate Bender
- Periosteal Elevator Fiber Handle
- Plate and Bone Holding Forceps Ratchet Lock-Type1
- Plate and Bone Holding Forceps Ratchet Lock-Type2
- Reduction Forcep Pointed Tip Ratchet Lock
- Reduction Forcep Serrated Tip Ratchet Lock
- Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
- Screw Driver Torque for 2.4/2.7 mm Locking Screws
- Screw Driver Quick Coupling for 2.7 mm Locking Screws
- Sharp Hook
- T Handle Quick Coupling
- Tap for 2.4 mm Screws, Quick Coupling
- Tap for 2.7 mm Screws, Quick Coupling
- Graphics Aluminum Box with Silicone Fittings
Specifications
Product Video
Specifications
| 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes |
|---|
Product Video
