Blog

You are currently viewing 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes​

2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes​

Model No: 124433-A15

  • Best Quality
  • Affordable Pricing
  • On-Time Delivery
  • Customer Satisfaction
request a brochure
request a Quote

Specification for 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes​

  •  Available Plates are in holes 3, 4 and 5.
  • Titanium and stainless steel are both available.
  • The plate has both combi and round holes. Combi holes enable for compression fixation with locking screws in the threaded part and cortical screws in the dynamic compression unit area.
  • In the threaded portion, the shaft holes take 2.7 mm locking screws, whereas the compression portion accepts 2.7 mm cortical screws.
  • Locking screws provide a fixed-angle construct to support the articular surface, eliminate the requirement for a bone graft, and achieve fixation in osteoporotic bone.
  • Implant implantation with the 2.7 mm Locking Compression Plate is possible to address the specific fracture pattern.
  • The limited-contact surface lowers bone-to-plate contact and aids in the preservation of the periosteal blood supply.
  • The ability to select multiple plate lengths eliminates the need to cut plates.
  • The polished surface and rounded edges reduce the possibility of tendon attachment.
  • The low plate and screw design reduces the possibility of tendon and soft tissue irritation.
  • Smaller plates and screws address fracture fragments one at a time, resulting in decreased overall implant volume.
  • The locking plate improves construct stability by lowering the chance of screw back-out and subsequent reduction loss. It also eliminates the necessity for precise anatomic plate contouring and lessens the likelihood of stripped screw holes.
  • A complete Instruments Set for the 2.7 mm Locking Compression Plate is offered. Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve and other general instruments are available for this plate.

uses of 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes​

  • Fixation of complex intra- and extra-articular fractures and osteotomies of the distal radius and other small bones in adults, skeletally mature adolescents, and the following adolescent distal radius fractures requires the use of a 2.7 mm Locking Volar Column Distal Radius Plate with 8 Head Holes.
  • Epiphyseal-to-articular fractures
  • Fractures of the metaphysis that extend into the joint space
  • Fractures of the skeleton
  • Injuries that prevent the distal radius from growing

Instruments set of 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes​

A complete instruments set are also available for 2.7 mm Locking Compression Plate. Instruments can be modified according to the customer’s requirement with minimum quantity required. All these instruments can be used several times.

We are keeping wide range of  instruments items in this set to ensures that Doctors get almost all required items during. Below is list of items of this set.

  • 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
  • 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
  • Counter Sink Copuling Shaft
  • Depth Gauge for 2 / 2.4 mm Screws
  • Depth Gauge for 2.7 mm Screws
  • Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
  • Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
  • Drill Bit 1.8 x 100 mm, Quick Coupling
  • Drill Bit 2 x 100 mm, Quick Coupling
  • Drill Bit 2.4 x 100 mm, Quick Coupling
  • Drill Bit 2.7 x 100 mm, Quick Coupling
  • Hohmann Recator 6 mm
  • Kirschner Wire 1.8 x 150 mm
  • Plate Bender
  • Periosteal Elevator Fiber Handle
  • Plate and Bone Holding Forceps Ratchet Lock-Type1
  • Plate and Bone Holding Forceps Ratchet Lock-Type2
  • Reduction Forcep Pointed Tip Ratchet Lock
  • Reduction Forcep Serrated Tip Ratchet Lock
  • Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
  • Screw Driver Torque for 2.4/2.7 mm Locking Screws
  • Screw Driver Quick Coupling for 2.7 mm Locking Screws
  • Sharp Hook
  • T Handle Quick Coupling
  • Tap for 2.4 mm Screws, Quick Coupling
  • Tap for 2.7 mm Screws, Quick Coupling
  • Graphics Aluminum Box with Silicone Fittings
Send Enquiry

Related Products