Blog

You are currently viewing 2.7 mm Locking Proximal Radius Radial Head Rim Plate​

2.7 mm Locking Proximal Radius Radial Head Rim Plate​

Model No: 124433-A25

  • Best Quality
  • Affordable Pricing
  • On-Time Delivery
  • Customer Satisfaction
request a brochure
request a Quote

Specification for 2.7 mm Locking Proximal Radius Radial Head Rim Plate

  • You can choose from 2, 3, or 4 holes on the plates.
  • Left and right direction plates are readily available.
  • You can choose between stainless steel and titanium.
  • This plate features both combo holes and round holes. Fixation using locking screws in the threaded section and cortex screws in the dynamic compression unit section are both possible thanks to the presence of combi holes.
  • Both the threaded and compression halves of the shaft have 2.7 mm screw holes to accommodate locking screws or cortical screws, respectively. 2.7 mm locking screws are compatible with the plate head locking holes.
  • Each patient’s unique fracture pattern can be treated with an implant thanks to the 2.7 mm locking proximal radius rim plate.
  • As the bone and plate make less contact, the periosteal blood supply is protected.
  • Cutting plates is unnecessary because of the available length options.
  • Plate that has already been contoured to fit human anatomy.
  • Due to the low profile of the plate and screw, tendon and soft tissue irritation is reduced.
  • Adhesion to tendons is reduced by rounding off the edges.
  • Reduced implant size allows for more precise, targeted treatment of individual fracture fragments.
  • Supporting the articular surface, minimising the need for bone graft, and achieving fixation in osteoporotic bone are all made possible with the help of locking screws, which provide a fixed-angle construct.
  • Stabilising the structure with a locking plate reduces the likelihood of screw back-out and subsequent reduction loss. Stripped screw holes are less likely to occur, and the need for precise anatomic plate contouring is lessened.
  • For a proximal rim plate with a locking radius of only 2.7 mm, you can get a full set of instruments. There are a wide variety of general instruments that can be used with this plate, including a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, bone cutter, bone nibbler, depth gauge, sleeve, screw driver, trocar sleeve, etc.

Uses of 2.7 mm Locking Proximal Radius Radial Head Rim Plate

  • Extra-articular and intra-articular fractures of the proximal radius, as well as multifragmented fractures of the radial neck, are all appropriate indications for the use of a 2.7 mm locking proximal radius rim plate.

Instruments set of 2.7 mm Locking Proximal Radius Radial Head Rim Plate

A complete instruments set are also available for 2.7 mm Locking Compression Plate. Instruments can be modified according to the customer’s requirement with minimum quantity required. All these instruments can be used several times.

We are keeping wide range of  instruments items in this set to ensures that Doctors get almost all required items during. Below is list of items of this set.

  • 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
  • 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
  • Counter Sink Copuling Shaft
  • Depth Gauge for 2 / 2.4 mm Screws
  • Depth Gauge for 2.7 mm Screws
  • Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
  • Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
  • Drill Bit 1.8 x 100 mm, Quick Coupling
  • Drill Bit 2 x 100 mm, Quick Coupling
  • Drill Bit 2.4 x 100 mm, Quick Coupling
  • Drill Bit 2.7 x 100 mm, Quick Coupling
  • Hohmann Recator 6 mm
  • Kirschner Wire 1.8 x 150 mm
  • Plate Bender
  • Periosteal Elevator Fiber Handle
  • Plate and Bone Holding Forceps Ratchet Lock-Type1
  • Plate and Bone Holding Forceps Ratchet Lock-Type2
  • Reduction Forcep Pointed Tip Ratchet Lock
  • Reduction Forcep Serrated Tip Ratchet Lock
  • Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
  • Screw Driver Torque for 2.4/2.7 mm Locking Screws
  • Screw Driver Quick Coupling for 2.7 mm Locking Screws
  • Sharp Hook
  • T Handle Quick Coupling
  • Tap for 2.4 mm Screws, Quick Coupling
  • Tap for 2.7 mm Screws, Quick Coupling
  • Graphics Aluminum Box with Silicone Fittings
Send Enquiry

Related Products