Blog

You are currently viewing 2/2.4/2.7 mm Locking Y Adaption Plate​

2/2.4/2.7 mm Locking Y Adaption Plate​

C1 - 2-2-4-2-7 mm Locking Y Adaption Plate

Model No:

  • Best Quality
  • Affordable Pricing
  • On-Time Delivery
  • Customer Satisfaction
request a brochure
request a Quote

Specification for 2/2.4/2.7 mm Locking Y Adaption Plate

  • Available Plates are for holes 4, 5, 6, 7, 8 and 10.
  • Available in Titanium and Stainless steel. 
  • Combi & Round holes plates have. Combi holes are to allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
  • Shaft accepts holes of  2/2.4/2.7 mm locking screws. It is accepted in the threaded portion or in the compression portion.
  • These Locking screws give a fixed-angle construct and support the articular surface. It reduces the requirement for bone grafting. It enables fixation in osteoporotic bone.
  • Locking 2.4 mm Compression Plate allow implant placement. It addresses fracture patterns for an Individual.
  • The bone-to-plate contact is reduced by Limited-contact surface. It preserve the periosteal blood supply.
  • No Need to cut as choice of different lengths of plates are available.
  • Tendon Adhesion is reduced by Polished surface and rounded edges.
  • Low plate and screw profile minimizes potential for tendon and soft tissue irritation.
  • Individually fracture fragments are addressed by screws and Smaller plates.
  • Construct Stability enhanced by locking plate. It lowers risk of screw back-out. It reduces subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring. It minimizes the risk of stripped screw holes.
  • Available complete Instruments Set for 2.4 mm Locking Compression Plate. Also Available for General Instruments for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.

Uses of 2/2.4/2.7 mm Locking Y Adaption Plate

  • It is used for stabilization, temporary fixation, or correction  of bones in anatomical region of the hand,
  • Indications
  • Fracture fixation of the phalanges and metacarpals
  • Osteotomies
  • Arthrodeses
  • Replantations and reconstructions of phalanges and metacarpals, particularly in osteopenic bone

Instruments set of 2/2.4/2.7 mm Locking Y Adaption Plate

Mini Fragment Instruments Set

Below are list of items in 2/2.4/2.7 mm Locking Y Adaption Plate Instruments Set.

  • 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
  • 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
  • Counter Sink Coupling Shaft
  • Depth Gauge for 2 / 2.4/ 2.7  mm Screws
  • Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm/2.0/2.7 mm
  • 1.8 x 100 mm Drill Bit , Quick Coupling
  • 2 x 100 mm Drill Bit , Quick Coupling
  • 2.4 x 100 mm Drill Bit , Quick Coupling
  • 2.7 x 100 mm Drill Bit , Quick Coupling
  •  6 mm Hohmann Reactor
  • 1.8 x 150 mm Kirschner Wire 
  • Plate Bender
  • Periosteal Elevator Fiber Handle
  • Plate and Bone Holding Forceps Ratchet Lock-Type1 and  Type2
  • Reduction Forcep Pointed and Serrated Tip Ratchet Lock
  • Reduction Forcep Tip Ratchet Lock
  • Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
  • Screw Driver Torque for 2.4/2.7 mm Locking Screws
  • Screw Driver Quick Coupling for 2.7 mm Locking Screws
  • Sharp Hook
  • T Handle Quick Coupling
  • Tap for 2.4 mm Screws, Quick Coupling
  • Tap for 2.7 mm Screws, Quick Coupling
  • Graphics Aluminum Box with Silicone Fittings
Send Enquiry

Related Products