Bone Screws
Capsur Enterprises Bone Screws category contains all screws used are below
Categories
- Straight Plate With Gap (Titanium)
- Straight Plate With Continue Hole (Titanium)
- ‘T’ – Plate 02 Head Hole (Titanium)
- ‘T’ – Plate 03 Head Hole (Titanium)
- Chin Plate (Titanium)
- Square Plate (Titanium)
- Rectangular 3D – Plate (Titanium)
- ‘Y’ – Plate 02 Head Hole (Titanium)
- ‘Y’ – Double End Plate 02 Head Hole (Titanium)
- ‘L’ – Plate 02 Head Hole – 90° – L/R (Titanium)
- ‘L’ – Plate 03 Head Hole – 90° – L/R (Titanium)
- ‘L’ – Oblique Angle Plate 02 Head Hole – 120° – L/R (Titanium)
- ‘L’ – Oblique Angle Plate 03 Head Hole – 120° – L/R (Titanium)
- ‘X’ – Plate (Titanium)
- Orbital Plate Without Gap (Titanium)
- Orbital Plate With Gap (Titanium)
- Mesh Plate (Titanium)
- ‘I’ Plate (Titanium)
- ‘H’ Plate (Titanium)
- ‘Z’ Plate (Titanium)
- Delta Plate (Titanium)
- ‘T’ Obliuqe Angle Plate 03 Head Hole – L/R (Titanium)
- Maxillofacial Screw (Self tapping) – Head Cross Slot (Titanium)
- Angle Reconstruction Plate Mandible
- Double Angle Reconstruction Plate Mandible
- MAXILLOFACIAL INSTRUMENT SET
- 2/2.4/2.7 mm Locking Compression Plate
- 2/2.4/2.7 mm Locking Adaption Plate
- 2/2.4/2.7 mm Locking T Adaption Plate 3 Head Holes
- 2/2.4/2.7 mm Locking T Adaption Plate 2 Head Holes
- 2/2.4/2.7 mm Locking Y Adaption Plate
- 2/2.4/2.7 mm Locking Condylar Plate
- 2/2.4/2.7 mm Locking L Plate
- 2/2.4/2.7 mm Locking L Plate Angle
- 2.7 mm Variable Angle Locking Two Column Volar Distal Radius Plate
- 2.7 mm Locking Dorsal Distal Radius Straight Plate
- 2.7 mm Locking Volar Column Distal Radius Plate 9 Head Holes
- 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes
- 2.7 mm Locking Dorsal Distal Radius T Plate 3 Head Holes
- 2.7 mm Locking Volar Long Distal Radius Plate 4 Head Holes
- 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 4 Head Holes
- 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes
- 2.7 mm Locking Volar Juxta-Articular Distal Radius Plate 5 Head Holes
- 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate 2 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate 3 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate Oblique
- 2.7 mm Locking Proximal Radius Radial Head Rim Plate
- 2.7 mm Locking Proximal Radius Radial Head Neck Plate
- 2.7 mm Locking Compression Plate
- 2.7 mm Locking Reconstruction Plate Straight
- 2.7 mm Locking Reconstruction Plate Curved
- 2.7 mm Locking Reconstruction Plates Straight Low Profile
- 2.7 mm mm Locking Reconstruction Plates Curved Low Profile
- 2.7 mm Locking T Plate 2 Head Holes
- 2.7 mm Locking T Plate 3 Head Holes
- 2.7 mm Locking T Plate Angle 3 Head Holes
- 2.7 mm One Third Tubular Plate
- 2.7 mm Locking Pediatric Hip Plates
- 3-5 mm Locking Reconstruction Plate Curved
- 3-5 mm Locking Reconstruction Plate Straight Low Profile
- 3-5 mm Locking Reconstruction Plate Curved Low Profile
- 3-5 mm Locking T Plate 4 Head Holes
- 3-5 mm Locking Hook Plate
- 2-7-3-5 mm Locking Wrist Fusion Plate
- 2-7- 3-5 mm Locking Dorsolateral Distal Humerus Plates
- 2-7- 3-5 mm Locking Lateral Distal Fibula Plate
- 2-7- 3-5 mm Locking Medial Distal Humerus Plates
- 2-7- 3-5 mm Locking Superior Anterior Clavicle Plate Lateral Extension
- 2-7-3-5 mm Locking Dorsolateral Distal Humerus Plates With Support
- 3-5 mm Locking Anterolateral Distal Tibia Plate
- 3-5 mm Locking Calcaneal Plate
- 3-5 mm Locking Compression Plate Low Contact
- 3-5 mm Locking Extra-Articular Distal Humerus Plate
- 3-5 mm Locking Medial Distal Tibia Plate with Tab
- 3-5 mm Locking Medial Distal Tibia Plate without Tab
- 3-5 mm Locking Medial Proximal Tibia Plate
- 3-5 mm Locking Olecranon Plate
- 3-5 mm Locking One Third Tubular Plate
- 3-5 mm Locking Pediatric Hip Plate
- 3-5 mm Locking Pilon Plate
- 3-5 mm Locking Posteromedial Proximal Tibia Plate
- 3-5 mm Locking Proximal Tibia Plate
- 3-5 mm Locking Reconstruction Plate Straight
- 3-5 mm Locking Superior Anterior Clavicle Plate
- 3-5 mm Locking T Plate 3 Head Holes
- 3-5 mm Locking T Plate Angle 3 Head Holes
- 3-5 mm PHILOS Plate
- Eight Plate
- LCP Clavicular S- Plate
- LCP Humeral Distal Medial -3-5
- 33-5 mm Locking Clavicle Hook Plate
- LCP Olecranal type II
- LCP Proximal Humeral Long Philos
- LCP Proximal Humeral short – LPHP
- 4-5-5 mm Locking Broad Compression Plate Low Contact
- 4-5-5 mm Locking Distal Femoral Plate
- 4-5-5 mm Locking Medial Proximal Tibia Plate
- 4-5-5 mm Locking Narrow Compression Plate Low Contact
- 4-5-5 mm Locking Proximal Femoral Hook Plate
- 4-5-5 mm Locking Proximal Femoral Plate
- 4-5-5 mm Locking Proximal Lateral Tibia Plate
- 4-5-5 mm Locking Proximal Tibia Plate-2
- 4-5-5 mm Locking Proximal Tibia Plate
- 4-5-5 mm Locking Reconstruction Plate Curved
- 4-5-5 mm Locking Reconstruction Plate Straight
- 4-5-5 mm Locking T Buttress Plate
- 4-5-5 mm Locking T Plate
- 5 mm Locking Condylar Femoral Plates
- 5 mm Locking DHS Plate
- 5 mm Locking Paediatric Hip Plate
- 5 mm Locking Paediatric Hip Plate1
- LCP Distal Lateral Tibia
- LCP Proximal Femoral Type II
- Locking DCS Plate 95 Degre
- Locking Trochanter Stabilizing Plate for DHS
- 3-5MM CALCANEAL PLATE
- 3-5MM CLOVERLEAF PLATE
- 3-5MM CURVED RECONSTRUCTION PLATE DC HOLES
- 3-5MM DCP SMALL PLATE
- 3-5MM LC- DCP SMALL PLATE
- 3-5MM ONE THIRD TUBULAR PLATE WITH COLLAR
- 3-5MM ONE THIRD TUBULAR PLATE
- 3-5MM SMALL T- PLATE OBLIQUE ANGLE 3 HEAD HOLE
- 3-5MM SMALL T- PLATE RIGHT ANGLE 3 HEAD HOLE
- 3-5MM SMALL T- PLATE RIGHT ANGLE 4 HEAD HOLE
- 3-5MM STRAIGHT RECONSTRUCTION PLATE DC HOLES
- 3-5MM Y RECONSTRUCTION PLATE
- 4-5MM 95 DCS PLATE DC HOLES
- 4-5MM 95 DCS PLATE ROUND HOLES
- 4-5MM 120 DOUBLE ANGLE DCS PLATE DC HOLES
- 4-5MM 130 DHS PLATE LONG BARRELL DC HOLES
- 4-5MM 130 DHS PLATE LONG BARRELL ROUND HOLES
- 4-5MM 130 DHS PLATE SHORT BARRELL DC HOLES
- 4-5MM 130 DHS PLATE SHORT BARRELL ROUND HOLES
- 4-5MM 135 DHS PLATE LONG BARRELL DC HOLES
- 4-5MM 135 DHS PLATE LONG BARRELL ROUND HOLES
- 4-5MM 135 DHS PLATE SHORT BARRELL DC HOLES
- 4-5MM 135 DHS PLATE SHORT BARRELL ROUND HOLES
- 4-5MM CURVED RECONSTRUCTION PLATE DC HOLES
- 4-5MM DCP BROAD PLATE
- 4-5MM DCP COBRA HEAD PLATE
- 4-5MM DCP CONDYLAR BUTRRESS PLATE
- 4-5MM DCP LATERAL TIBIA HEAD BUTRRESS PLATE
- 4-5MM DCP NARROW PLATE
- 4-5MM HOOK PLATE
- 4-5MM L- BUTRRESS PLATE
- 4-5MM LC- DCP BROAD PLATE
- 4-5MM LC- DCP CONDYLAR BUTRRESS PLATE
- 4-5MM LC- DCP LATERAL TIBIA HEAD BUTRRESS PLATE
- 4-5MM LC- DCP NARROW PLATE
- 4-5MM LENGTHENING BROAD PLATE 10 HOLES
- 4-5MM LENGTHENING NARROW PLATE 8 HOLES
- 4-5MM PROXIMAL TIBIA PLATE
- 4-5MM SEMI TUBULAR PLATE
- 4-5MM SPOON PLATE
- 4-5MM STRAIGHT RECONSTRUCTION PLATE DC HOLES
- 4-5MM T- BUTRRESS PLATE
- 4-5MM T- PLATE
- 4-5MM Y RECONSTRUCTION PLATE
- Anterior Cervical Plate (ACLP)
- 3.5 mm Anterior Cervical Screw
- 4 mm Anterior Cervical Screw
- Monoaxial Pedicle Screws
- Monoaxial Reduction Screws
- Polyaxial Pedicle Screws
- Polyaxial Reduction Screws
- Crosslink Connector / Transverse Connector Type 1
- Crosslink Connector / Transverse Connector Type 2
- Laminar Hook
- Pedicle Hook
- Connecting Rod
- Cervical Cage | Anterior Cervical Interbody Fusion ( ACIF Cage)
- Lumbar Cage | Posterior Lumbar Interbody Fusion (PLIF Cage)
- TLIF Cage | Transforaminal Lumbar Interbody Fusion Cage
- Titanium Mesh Cage
- Steinmann Pins
- Steinmann Pins Positive Profile Thread
- Steinman Pin Centre Thread (Denham Pin)
- Drill Bits
- Schanz Screw (Schanz Pin)
- Schanz Screw (Schanz Pin) Self Tapping
- Schanz Screw (Schanz Pin) Tapered Thread
- Kirschner Wire Single Trocar
- Kirschner Wire Double Trocar
- Kirschner Wire Double Trocar Fully Threaded
- Suture Wire / Cerclage Wire
- Cerclage Wire – Loop
- Guide Wire for Tibia/Femur, Ball Tip, 2.5 x 900 mm
- Guide Wire for Tibia/Femur, Plain, 2.5 x 900 mm
- Gigli Saw Wire
- Guide Wire for 4 mm Cancellous Cannulated Screws, 1.2 x 230 mm
- Guide Wire for 6.5 mm Cancellous Cannulated Screws, 2 x 230 mm
- Guide Wire for PFN 2/2.5/3 x 400 mm
- Ilizarov Wire Bayonet Point
- Ilizarov Wire Tocar Point
- Ilizarov Olive Wire Bayonet Pointa
- Ilizarov Olive Wire Tocar Point
- Epiphyseal Staple
- Coventry Staple
- Locking Cortical Screws
- Cortical Screws
- Locking Cancellous Screws
- Cancellous Screws
- Locking Cannulated Screws
- Cannulated Screws
- Headless Compression Screws Partially Thread
- Headless Compression Screws Full Thread
- Interlocking Nail Screws
- Interference Screws
- Herbert Screws Cannulated
- Malleolar Screws
- DHS-DCS Screws
- Cross Head Screws
- Anchor Screws
- ANCHOR SUTURE SCREW
- SUTURE DISC
- ENDOBUTTON
- MULTI SPIKED WASHER FOR LIGAMENT
- SUTURE POST
- SPIKED LIGAMENT STAPLE
- HERBERT SCREW
- ACL. SCREW (ANTERIOR CRUCIATE LIGAMENT SCREW)
- ANCHOR SUTURE SCREW PRE LOADED
- ENDOBUTTON WITH LOOP
- ENDOBUTTON WITH ADJUSTABLE LOOP
- BIO A.C.L. SCREW – PLA (POLYLACTIC ACID)
- BIO A.C.L. SCREW – B-TCP (B-TRICALCIUM PHOSPHATE)
- AESCULAP CLAMP(2.5mm)
- AESCULAP CLAMP(8mm)
- DOUBLE PIN CLAMP
- UNIVERSAL JOINT FOR TWO ROD
- AESCULAP CLAMP(4.0mm)
- A.O. TYPE CLAMP(4.5mm)
- OPEN CLAMP
- A.O. TYPE CLAMP(2.5mm)
- AESCULAP CLAMP(4.5mm)
- A.O. TYPE CLAMP(11mm)
- METAPHYTICAL CLAMP
- A.O. TYPE CLAMP(3.5mm)
- BALL & SOKET CLAMP
- CONNECTING ROD(2.5mm)
- CONNECTING ROD(4.0mm)
- CONNECTING ROD(20mm)
- CONNECTING ROD(3.0mm)
- CONNECTING ROD(8.0mm)
- CONNECTING ROD(1mm)
- BALL & SOKET TPANNER
- DISTRACTOR UNIT
- T-HANDLE SPANNER
- ALPHA CLAMP (LINK JOINT)
- BETA CLAMP (LINK JOINT) Size: 8mm X 12mm
- SINGLE PIN DISTRACTOR (M4) (CT.EV)
- BETA CLAMP (LINK JOINT) Dia.: 10mm X 15mm
- DOUBLE PIN DISTRACTOR (M4) (C.T.EV)
- DOUBLE PIN DISTRACTOR (M6) (C.T.EV)
- STEAIGHT ROD – KNURLED
- BENT ROD- KNURLED (SMALL “L” ROD)
- BENT ROD- KNURLED (LARGE “L” ROD)
- BENT ROD- KNURLED (“Z” ROD)
- ALLEN KEY
- HALF RING
- 5/8 RING
- FULL RING
- ITALIAN FEMORAL ARCH
- THREADED ROD (Dia.: 6.0mm)
- ARCH
- TRLESCOPIC ROD
- HINGES
- SIMPLE WASHER
- CONNICAL WASHER
- CONNICAL COUPLE WASHER
- POST – MALE
- POST – FEMALE
- OBLIQUE SUPPORT
- CURVED PLATE
- CONNECTING PLATE
- TWISTED PLATE
- CONNECTING BOLT
- WIRE FIXATION BOLT(HEX HEAD) (SLOTTED)
- WIRE FIXATION BOLT(HEX HEAD) (CENTRIC)
- WIRE FIXATION BOLT(TWO PART HEAD) (SLOTTED)
- WIRE FIXATION BOLT(TWO PART HEAD) (CENTRIC)
- NUT
- MULTY PIN FIXATION BOLT
- SINGLE PIN FIXATION BOLT
- WRENCH OF CUBE
- NYLON NUT
- UNIVERSAL JOINT
- SQUARE NUT
- THREADED SOCKET
- OLIVE WIRE (BAYONET POINT)
- OLIVE WIRE (TROCAR POINT)
- TENSION K-WIRE (BAYONET POINT)
- TENSION K-WIRE (TROCAR POINT)
- WIRE TENSIONER (MANNUAL)
- WIRE TENSIONER (DYNAMETRIC)
- ORDINARY FIX SPANNER
- RING SPANNER
- T-HANDLE SPANNER
- STEINMAN PIN
- DENHAM PIN
- SCHANZ SCREW
- SCHANZ SCREW (16 & 32mm Thread Length: 6″)
- SCHANZ SCREW (16 & 32mm Thread Length: 8″)
- SCHANZ SCREW (SELF DRILLING Length: 6″)
- SCHANZ SCREW TAPPER THREAD(32mm & 52mm Thread Dia.: 6.0mm)
- SCHANZ SCREW(CANCELLOUS THREAD)
- SCHANZ SCREW (SELF DRILLING Length: 8″)
- SCHANZ SCREW TAPPER THREAD(32mm & 52mm Thread Length: 08″)
- HIP TRACTION SCREW(Length: 8″)
- HIP TRACTION SCREW(Length: 10″)
- GUIDE PIN
- GUIDE PIN (THREADED)
- GUIDE WIRE LONG(Length: 30″)
- GUIDE WIRE LONG(Length: 40″)
- GUIDE WIRE LONG (OLIVE END)
- Screw Driver – Torque
- Screws Drivers – Fiber Handle
- Screws Drivers – Fiber Handle Cannulated
- Screws Drivers – Holding Sleeve
- Screws Drivers – Shaft Copuling
- Screws Drivers – T Handle
- Screws Drivers – Holding Sleeve for Craniomaxillofacial Screws
- Screws Drivers – PolyAxial Screws
- Screws Drivers – MonoAxial Screws
- Screws Drivers – Shaft Quick Coupling, SS Handle
- Screws Drivers – Shaft Quick Coupling, Plastic Handle
- Condylar Bone holding Forceps Ball Tip Ratchet Lock
- Condylar Bone holding Forceps Ball Tip Speed Lock
- Kern/Lane Bone Holding Forceps
- Self Centering Bone Holding Forceps Richat Lock
- Self Centering Bone Holding Forceps Speed Lock
- Hey Grooves Bone Holding Forceps
- Bone Holding Forceps Patella 3 Prong
- Bone Holding Forceps Patella 4 Prong
- Lowman Bone Clamp
- Burns Bone Holding Forceps Richat Lock
- Burns Bone Holding Forceps Speed Lock
- Bone and Plate Holding Forceps for Mini Plates
- Bone and Plate Holding Forceps-Type
- Bone and Plate Holding Forceps-Type2
- Fergusson (Fibula) Bone holding Forceps
- Plate and Bone Holding Forcep with Sliding
- Hohmann Retractor
- Gelpi Retractor
- Mastoid Retractor Self Retaining
- Mastoid Retractor Self Retaining-Extended
- Round Retractor Self Retaining
- Volkman Retractor
- Langenbeck Retractor
- Langenbeck Retractor Extended
- Cobra Retractor
- Cat Paw Retractor
- Charnley Retractor With Blades
- Weight and Chain for Charnley Retractor
- Charnley Pin Retractor and T Handle
- Lamina Spreaders
- Nerve Root Retractor
- Czerny Retractor
- Murphy Lane Bone Skid
- Rib Retractor Set with Hinged Arms & Four Blades
- Cloward cervical retractor with 15 Blade
- Dura Retractor
- McDonald Retractor Double Ended
- Broken Screw Removal Hollow Mill Shaft and Handle
- Trephine T Handle
- Broken Screw Removal T Handle
- Broken Screw Head Removal Forceps Ratchet Lock
- Broken Screw Head Removal Forceps Speed Lock
- Broken Screw Removal Richat Lock
- Broken Screw Removal Conical
- Screw Holding Forceps
- Broken Nail Removal T Handle Set of 4 pieces
<ul class=”sidenav-ul”>
<li><a href=”/mayo-needle-holder/”>Mayo Needle Holder</a></li>
<li><a href=”/olsen-needle-holder-and-scissors-tungsten-carbide-tip/”>Olsen Needle Holder and Scissors-Tungsten Carbide Tip</a></li>
<li><a href=”/meniscus-holding-forceps/”>Meniscus Holding Forceps</a></li>
</ul>
- Drill & ‘l’ap Sleeve Combirn’ld / Double Drill Guide/ Unive1•sa1 Drill Guide
- Double Drill Guide with Stopper and 2 Sleeve
- Drill Guide Neutral and Load
- Threaded Drill Guide
- Insert Drill Sleeve
- Drill Bit Sleeve
- Tap Sleeve
- Protection Sleeve, Dia 4.5 mm
- Triple Drill Guide
- Triple Trocar
- Pointed Drill Guide with 4.5 mm Tap Sleeve & 3.2 mm Insert Drill Sleeve