2.7MM LOCKING BONE PLATES
All plates in the 2.7mm Locking Bone Plates are included in Capsur Enterprises' category for 2.7mm Locking Bone Plates. View the complete category of 2.7mm Locking Bone Plates products below.
2.7 mm Locking Reconstruction Plates Straight Low Profile
Model No: 124433-A15
2.7 mm mm Locking Reconstruction Plates Curved Low Profile
Model No: 124433-A16
Categories
- Straight Plate With Gap (Titanium)
- Straight Plate With Continue Hole (Titanium)
- ‘T’ – Plate 02 Head Hole (Titanium)
- ‘T’ – Plate 03 Head Hole (Titanium)
- Chin Plate (Titanium)
- Square Plate (Titanium)
- Rectangular 3D – Plate (Titanium)
- ‘Y’ – Plate 02 Head Hole (Titanium)
- ‘Y’ – Double End Plate 02 Head Hole (Titanium)
- ‘L’ – Plate 02 Head Hole – 90° – L/R (Titanium)
- ‘L’ – Plate 03 Head Hole – 90° – L/R (Titanium)
- ‘L’ – Oblique Angle Plate 02 Head Hole – 120° – L/R (Titanium)
- ‘L’ – Oblique Angle Plate 03 Head Hole – 120° – L/R (Titanium)
- ‘X’ – Plate (Titanium)
- Orbital Plate Without Gap (Titanium)
- Orbital Plate With Gap (Titanium)
- Mesh Plate (Titanium)
- ‘I’ Plate (Titanium)
- ‘H’ Plate (Titanium)
- ‘Z’ Plate (Titanium)
- Delta Plate (Titanium)
- ‘T’ Obliuqe Angle Plate 03 Head Hole – L/R (Titanium)
- Maxillofacial Screw (Self tapping) – Head Cross Slot (Titanium)
- Angle Reconstruction Plate Mandible
- Double Angle Reconstruction Plate Mandible
- MAXILLOFACIAL INSTRUMENT SET
- 2/2.4/2.7 mm Locking Compression Plate
- 2/2.4/2.7 mm Locking Adaption Plate
- 2/2.4/2.7 mm Locking T Adaption Plate 3 Head Holes
- 2/2.4/2.7 mm Locking T Adaption Plate 2 Head Holes
- 2/2.4/2.7 mm Locking Y Adaption Plate
- 2/2.4/2.7 mm Locking Condylar Plate
- 2/2.4/2.7 mm Locking L Plate
- 2/2.4/2.7 mm Locking L Plate Angle
- 2.7 mm Variable Angle Locking Two Column Volar Distal Radius Plate
- 2.7 mm Locking Dorsal Distal Radius Straight Plate
- 2.7 mm Locking Volar Column Distal Radius Plate 9 Head Holes
- 2.7 mm Locking Volar Column Distal Radius Plate 8 Head Holes
- 2.7 mm Locking Dorsal Distal Radius T Plate 3 Head Holes
- 2.7 mm Locking Volar Long Distal Radius Plate 4 Head Holes
- 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 4 Head Holes
- 2.7 mm Locking Volar Extra-Articular Distal Radius Plate 5 Head Holes
- 2.7 mm Locking Volar Juxta-Articular Distal Radius Plate 5 Head Holes
- 2.7 mm Locking Volar Distal Radius Buttress Plate 5 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate 2 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate 3 Head Holes
- 2.7 mm Locking Dorsal Distal Radius L Plate Oblique
- 2.7 mm Locking Proximal Radius Radial Head Rim Plate
- 2.7 mm Locking Proximal Radius Radial Head Neck Plate
- 2.7 mm Locking Compression Plate
- 2.7 mm Locking Reconstruction Plate Straight
- 2.7 mm Locking Reconstruction Plate Curved
- 2.7 mm Locking Reconstruction Plates Straight Low Profile
- 2.7 mm mm Locking Reconstruction Plates Curved Low Profile
- 2.7 mm Locking T Plate 2 Head Holes
- 2.7 mm Locking T Plate 3 Head Holes
- 2.7 mm Locking T Plate Angle 3 Head Holes
- 2.7 mm One Third Tubular Plate
- 2.7 mm Locking Pediatric Hip Plates
- 3-5 mm Locking Reconstruction Plate Curved
- 3-5 mm Locking Reconstruction Plate Straight Low Profile
- 3-5 mm Locking Reconstruction Plate Curved Low Profile
- 3-5 mm Locking T Plate 4 Head Holes
- 3-5 mm Locking Hook Plate
- 2-7-3-5 mm Locking Wrist Fusion Plate
- 2-7- 3-5 mm Locking Dorsolateral Distal Humerus Plates
- 2-7- 3-5 mm Locking Lateral Distal Fibula Plate
- 2-7- 3-5 mm Locking Medial Distal Humerus Plates
- 2-7- 3-5 mm Locking Superior Anterior Clavicle Plate Lateral Extension
- 2-7-3-5 mm Locking Dorsolateral Distal Humerus Plates With Support
- 3-5 mm Locking Anterolateral Distal Tibia Plate
- 3-5 mm Locking Calcaneal Plate
- 3-5 mm Locking Compression Plate Low Contact
- 3-5 mm Locking Extra-Articular Distal Humerus Plate
- 3-5 mm Locking Medial Distal Tibia Plate with Tab
- 3-5 mm Locking Medial Distal Tibia Plate without Tab
- 3-5 mm Locking Medial Proximal Tibia Plate
- 3-5 mm Locking Olecranon Plate
- 3-5 mm Locking One Third Tubular Plate
- 3-5 mm Locking Pediatric Hip Plate
- 3-5 mm Locking Pilon Plate
- 3-5 mm Locking Posteromedial Proximal Tibia Plate
- 3-5 mm Locking Proximal Tibia Plate
- 3-5 mm Locking Reconstruction Plate Straight
- 3-5 mm Locking Superior Anterior Clavicle Plate
- 3-5 mm Locking T Plate 3 Head Holes
- 3-5 mm Locking T Plate Angle 3 Head Holes
- 3-5 mm PHILOS Plate
- Eight Plate
- LCP Clavicular S- Plate
- LCP Humeral Distal Medial -3-5
- 33-5 mm Locking Clavicle Hook Plate
- LCP Olecranal type II
- LCP Proximal Humeral Long Philos
- LCP Proximal Humeral short – LPHP
- 4-5-5 mm Locking Broad Compression Plate Low Contact
- 4-5-5 mm Locking Distal Femoral Plate
- 4-5-5 mm Locking Medial Proximal Tibia Plate
- 4-5-5 mm Locking Narrow Compression Plate Low Contact
- 4-5-5 mm Locking Proximal Femoral Hook Plate
- 4-5-5 mm Locking Proximal Femoral Plate
- 4-5-5 mm Locking Proximal Lateral Tibia Plate
- 4-5-5 mm Locking Proximal Tibia Plate-2
- 4-5-5 mm Locking Proximal Tibia Plate
- 4-5-5 mm Locking Reconstruction Plate Curved
- 4-5-5 mm Locking Reconstruction Plate Straight
- 4-5-5 mm Locking T Buttress Plate
- 4-5-5 mm Locking T Plate
- 5 mm Locking Condylar Femoral Plates
- 5 mm Locking DHS Plate
- 5 mm Locking Paediatric Hip Plate
- 5 mm Locking Paediatric Hip Plate1
- LCP Distal Lateral Tibia
- LCP Proximal Femoral Type II
- Locking DCS Plate 95 Degre
- Locking Trochanter Stabilizing Plate for DHS
- 3-5MM CALCANEAL PLATE
- 3-5MM CLOVERLEAF PLATE
- 3-5MM CURVED RECONSTRUCTION PLATE DC HOLES
- 3-5MM DCP SMALL PLATE
- 3-5MM LC- DCP SMALL PLATE
- 3-5MM ONE THIRD TUBULAR PLATE WITH COLLAR
- 3-5MM ONE THIRD TUBULAR PLATE
- 3-5MM SMALL T- PLATE OBLIQUE ANGLE 3 HEAD HOLE
- 3-5MM SMALL T- PLATE RIGHT ANGLE 3 HEAD HOLE
- 3-5MM SMALL T- PLATE RIGHT ANGLE 4 HEAD HOLE
- 3-5MM STRAIGHT RECONSTRUCTION PLATE DC HOLES
- 3-5MM Y RECONSTRUCTION PLATE
- 4-5MM 95 DCS PLATE DC HOLES
- 4-5MM 95 DCS PLATE ROUND HOLES
- 4-5MM 120 DOUBLE ANGLE DCS PLATE DC HOLES
- 4-5MM 130 DHS PLATE LONG BARRELL DC HOLES
- 4-5MM 130 DHS PLATE LONG BARRELL ROUND HOLES
- 4-5MM 130 DHS PLATE SHORT BARRELL DC HOLES
- 4-5MM 130 DHS PLATE SHORT BARRELL ROUND HOLES
- 4-5MM 135 DHS PLATE LONG BARRELL DC HOLES
- 4-5MM 135 DHS PLATE LONG BARRELL ROUND HOLES
- 4-5MM 135 DHS PLATE SHORT BARRELL DC HOLES
- 4-5MM 135 DHS PLATE SHORT BARRELL ROUND HOLES
- 4-5MM CURVED RECONSTRUCTION PLATE DC HOLES
- 4-5MM DCP BROAD PLATE
- 4-5MM DCP COBRA HEAD PLATE
- 4-5MM DCP CONDYLAR BUTRRESS PLATE
- 4-5MM DCP LATERAL TIBIA HEAD BUTRRESS PLATE
- 4-5MM DCP NARROW PLATE
- 4-5MM HOOK PLATE
- 4-5MM L- BUTRRESS PLATE
- 4-5MM LC- DCP BROAD PLATE
- 4-5MM LC- DCP CONDYLAR BUTRRESS PLATE
- 4-5MM LC- DCP LATERAL TIBIA HEAD BUTRRESS PLATE
- 4-5MM LC- DCP NARROW PLATE
- 4-5MM LENGTHENING BROAD PLATE 10 HOLES
- 4-5MM LENGTHENING NARROW PLATE 8 HOLES
- 4-5MM PROXIMAL TIBIA PLATE
- 4-5MM SEMI TUBULAR PLATE
- 4-5MM SPOON PLATE
- 4-5MM STRAIGHT RECONSTRUCTION PLATE DC HOLES
- 4-5MM T- BUTRRESS PLATE
- 4-5MM T- PLATE
- 4-5MM Y RECONSTRUCTION PLATE
- Anterior Cervical Plate (ACLP)
- 3.5 mm Anterior Cervical Screw
- 4 mm Anterior Cervical Screw
- Monoaxial Pedicle Screws
- Monoaxial Reduction Screws
- Polyaxial Pedicle Screws
- Polyaxial Reduction Screws
- Crosslink Connector / Transverse Connector Type 1
- Crosslink Connector / Transverse Connector Type 2
- Laminar Hook
- Pedicle Hook
- Connecting Rod
- Cervical Cage | Anterior Cervical Interbody Fusion ( ACIF Cage)
- Lumbar Cage | Posterior Lumbar Interbody Fusion (PLIF Cage)
- TLIF Cage | Transforaminal Lumbar Interbody Fusion Cage
- Titanium Mesh Cage
- Steinmann Pins
- Steinmann Pins Positive Profile Thread
- Steinman Pin Centre Thread (Denham Pin)
- Drill Bits
- Schanz Screw (Schanz Pin)
- Schanz Screw (Schanz Pin) Self Tapping
- Schanz Screw (Schanz Pin) Tapered Thread
- Kirschner Wire Single Trocar
- Kirschner Wire Double Trocar
- Kirschner Wire Double Trocar Fully Threaded
- Suture Wire / Cerclage Wire
- Cerclage Wire – Loop
- Guide Wire for Tibia/Femur, Ball Tip, 2.5 x 900 mm
- Guide Wire for Tibia/Femur, Plain, 2.5 x 900 mm
- Gigli Saw Wire
- Guide Wire for 4 mm Cancellous Cannulated Screws, 1.2 x 230 mm
- Guide Wire for 6.5 mm Cancellous Cannulated Screws, 2 x 230 mm
- Guide Wire for PFN 2/2.5/3 x 400 mm
- Ilizarov Wire Bayonet Point
- Ilizarov Wire Tocar Point
- Ilizarov Olive Wire Bayonet Pointa
- Ilizarov Olive Wire Tocar Point
- Epiphyseal Staple
- Coventry Staple
- Locking Cortical Screws
- Cortical Screws
- Locking Cancellous Screws
- Cancellous Screws
- Locking Cannulated Screws
- Cannulated Screws
- Headless Compression Screws Partially Thread
- Headless Compression Screws Full Thread
- Interlocking Nail Screws
- Interference Screws
- Herbert Screws Cannulated
- Malleolar Screws
- DHS-DCS Screws
- Cross Head Screws
- Anchor Screws
- ANCHOR SUTURE SCREW
- SUTURE DISC
- ENDOBUTTON
- MULTI SPIKED WASHER FOR LIGAMENT
- SUTURE POST
- SPIKED LIGAMENT STAPLE
- HERBERT SCREW
- ACL. SCREW (ANTERIOR CRUCIATE LIGAMENT SCREW)
- ANCHOR SUTURE SCREW PRE LOADED
- ENDOBUTTON WITH LOOP
- ENDOBUTTON WITH ADJUSTABLE LOOP
- BIO A.C.L. SCREW – PLA (POLYLACTIC ACID)
- BIO A.C.L. SCREW – B-TCP (B-TRICALCIUM PHOSPHATE)
- AESCULAP CLAMP(2.5mm)
- AESCULAP CLAMP(8mm)
- DOUBLE PIN CLAMP
- UNIVERSAL JOINT FOR TWO ROD
- AESCULAP CLAMP(4.0mm)
- A.O. TYPE CLAMP(4.5mm)
- OPEN CLAMP
- A.O. TYPE CLAMP(2.5mm)
- AESCULAP CLAMP(4.5mm)
- A.O. TYPE CLAMP(11mm)
- METAPHYTICAL CLAMP
- A.O. TYPE CLAMP(3.5mm)
- BALL & SOKET CLAMP
- CONNECTING ROD(2.5mm)
- CONNECTING ROD(4.0mm)
- CONNECTING ROD(20mm)
- CONNECTING ROD(3.0mm)
- CONNECTING ROD(8.0mm)
- CONNECTING ROD(1mm)
- BALL & SOKET TPANNER
- DISTRACTOR UNIT
- T-HANDLE SPANNER
- ALPHA CLAMP (LINK JOINT)
- BETA CLAMP (LINK JOINT) Size: 8mm X 12mm
- SINGLE PIN DISTRACTOR (M4) (CT.EV)
- BETA CLAMP (LINK JOINT) Dia.: 10mm X 15mm
- DOUBLE PIN DISTRACTOR (M4) (C.T.EV)
- DOUBLE PIN DISTRACTOR (M6) (C.T.EV)
- STEAIGHT ROD – KNURLED
- BENT ROD- KNURLED (SMALL “L” ROD)
- BENT ROD- KNURLED (LARGE “L” ROD)
- BENT ROD- KNURLED (“Z” ROD)
- ALLEN KEY
- HALF RING
- 5/8 RING
- FULL RING
- ITALIAN FEMORAL ARCH
- THREADED ROD (Dia.: 6.0mm)
- ARCH
- TRLESCOPIC ROD
- HINGES
- SIMPLE WASHER
- CONNICAL WASHER
- CONNICAL COUPLE WASHER
- POST – MALE
- POST – FEMALE
- OBLIQUE SUPPORT
- CURVED PLATE
- CONNECTING PLATE
- TWISTED PLATE
- CONNECTING BOLT
- WIRE FIXATION BOLT(HEX HEAD) (SLOTTED)
- WIRE FIXATION BOLT(HEX HEAD) (CENTRIC)
- WIRE FIXATION BOLT(TWO PART HEAD) (SLOTTED)
- WIRE FIXATION BOLT(TWO PART HEAD) (CENTRIC)
- NUT
- MULTY PIN FIXATION BOLT
- SINGLE PIN FIXATION BOLT
- WRENCH OF CUBE
- NYLON NUT
- UNIVERSAL JOINT
- SQUARE NUT
- THREADED SOCKET
- OLIVE WIRE (BAYONET POINT)
- OLIVE WIRE (TROCAR POINT)
- TENSION K-WIRE (BAYONET POINT)
- TENSION K-WIRE (TROCAR POINT)
- WIRE TENSIONER (MANNUAL)
- WIRE TENSIONER (DYNAMETRIC)
- ORDINARY FIX SPANNER
- RING SPANNER
- T-HANDLE SPANNER
- STEINMAN PIN
- DENHAM PIN
- SCHANZ SCREW
- SCHANZ SCREW (16 & 32mm Thread Length: 6″)
- SCHANZ SCREW (16 & 32mm Thread Length: 8″)
- SCHANZ SCREW (SELF DRILLING Length: 6″)
- SCHANZ SCREW TAPPER THREAD(32mm & 52mm Thread Dia.: 6.0mm)
- SCHANZ SCREW(CANCELLOUS THREAD)
- SCHANZ SCREW (SELF DRILLING Length: 8″)
- SCHANZ SCREW TAPPER THREAD(32mm & 52mm Thread Length: 08″)
- HIP TRACTION SCREW(Length: 8″)
- HIP TRACTION SCREW(Length: 10″)
- GUIDE PIN
- GUIDE PIN (THREADED)
- GUIDE WIRE LONG(Length: 30″)
- GUIDE WIRE LONG(Length: 40″)
- GUIDE WIRE LONG (OLIVE END)
- Screw Driver – Torque
- Screws Drivers – Fiber Handle
- Screws Drivers – Fiber Handle Cannulated
- Screws Drivers – Holding Sleeve
- Screws Drivers – Shaft Copuling
- Screws Drivers – T Handle
- Screws Drivers – Holding Sleeve for Craniomaxillofacial Screws
- Screws Drivers – PolyAxial Screws
- Screws Drivers – MonoAxial Screws
- Screws Drivers – Shaft Quick Coupling, SS Handle
- Screws Drivers – Shaft Quick Coupling, Plastic Handle
- Condylar Bone holding Forceps Ball Tip Ratchet Lock
- Condylar Bone holding Forceps Ball Tip Speed Lock
- Kern/Lane Bone Holding Forceps
- Self Centering Bone Holding Forceps Richat Lock
- Self Centering Bone Holding Forceps Speed Lock
- Hey Grooves Bone Holding Forceps
- Bone Holding Forceps Patella 3 Prong
- Bone Holding Forceps Patella 4 Prong
- Lowman Bone Clamp
- Burns Bone Holding Forceps Richat Lock
- Burns Bone Holding Forceps Speed Lock
- Bone and Plate Holding Forceps for Mini Plates
- Bone and Plate Holding Forceps-Type
- Bone and Plate Holding Forceps-Type2
- Fergusson (Fibula) Bone holding Forceps
- Plate and Bone Holding Forcep with Sliding
- Hohmann Retractor
- Gelpi Retractor
- Mastoid Retractor Self Retaining
- Mastoid Retractor Self Retaining-Extended
- Round Retractor Self Retaining
- Volkman Retractor
- Langenbeck Retractor
- Langenbeck Retractor Extended
- Cobra Retractor
- Cat Paw Retractor
- Charnley Retractor With Blades
- Weight and Chain for Charnley Retractor
- Charnley Pin Retractor and T Handle
- Lamina Spreaders
- Nerve Root Retractor
- Czerny Retractor
- Murphy Lane Bone Skid
- Rib Retractor Set with Hinged Arms & Four Blades
- Cloward cervical retractor with 15 Blade
- Dura Retractor
- McDonald Retractor Double Ended
- Broken Screw Removal Hollow Mill Shaft and Handle
- Trephine T Handle
- Broken Screw Removal T Handle
- Broken Screw Head Removal Forceps Ratchet Lock
- Broken Screw Head Removal Forceps Speed Lock
- Broken Screw Removal Richat Lock
- Broken Screw Removal Conical
- Screw Holding Forceps
- Broken Nail Removal T Handle Set of 4 pieces
<ul class=”sidenav-ul”>
<li><a href=”/mayo-needle-holder/”>Mayo Needle Holder</a></li>
<li><a href=”/olsen-needle-holder-and-scissors-tungsten-carbide-tip/”>Olsen Needle Holder and Scissors-Tungsten Carbide Tip</a></li>
<li><a href=”/meniscus-holding-forceps/”>Meniscus Holding Forceps</a></li>
</ul>
- Drill & ‘l’ap Sleeve Combirn’ld / Double Drill Guide/ Unive1•sa1 Drill Guide
- Double Drill Guide with Stopper and 2 Sleeve
- Drill Guide Neutral and Load
- Threaded Drill Guide
- Insert Drill Sleeve
- Drill Bit Sleeve
- Tap Sleeve
- Protection Sleeve, Dia 4.5 mm
- Triple Drill Guide
- Triple Trocar
- Pointed Drill Guide with 4.5 mm Tap Sleeve & 3.2 mm Insert Drill Sleeve
