Model No: 124433-A20
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 2.7 mm One Third Tubular Plate
- Available Plates are in holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, and 18.
- Available in Titanium and Stainless steel.
- Round and combi holes are present on the plate. Combination holes enable fixing with cortex screws for compression in the dynamic compression unit section and locking screws in the threaded section.
- The shaft holes can accommodate 2.7 mm cortical screws or locking screws depending on whether the shaft is threaded or compressed.
- To support the articular surface, lessen the need for bone graft, and achieve fixation in osteoporotic bone, locking screws provide a fixed-angle construct.
- Implant placement is made possible by the 2.7 mm One Third Tubular Plate for addressing specific fracture pattern.
- Reduced bone-to-plate contact and preservation of the periosteal blood supply are benefits of limited-contact surfaces.
- The option to select different plate lengths eliminates the need to cut plates.
- The chance of tendon adhesion is reduced by the polished surface and rounded edges.
- Low plate and screw profiles reduce the risk of irritated soft tissue and tendons.
- Individual fracture fragments are addressed by smaller plates and screws, resulting in a smaller overall implant bulk.
- Locking plates improve construction stability while lowering the chance of screw back-out and subsequent reduction loss. Additionally, it lessens the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- There is a full set of instruments for 2.7 mm One Third Tubular Plate. For this plate, general instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc. are available.
Uses of 2.7 mm One Third Tubular Plate
- Intended to be used for smaller bones 2.7 mm One Third Tubular Plate. Specifically used for the Ulna, Radius, Fibula, Metatarsals, and Metacarpal bones.
Instruments set of 2.7 mm One Third Tubular Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- 2.4 mm Threaded Drill Guide for 1.8 mm Drill Bit
- 2.7 mm Threaded Drill Guide for 2 mm Drill Bit
- Counter Sink Coupling Shaft
- Depth Gauge for 2 / 2.4/ 2.7 mm Screws
- Double Drill Sleeve (Universal Drill Sleeve) 1.8/2.4 mm
- Double Drill Sleeve (Universal Drill Sleeve) 2.0/2.7 mm
- Quick Coupling Drill Bit 1.8 x 100 mm,
- Quick Coupling Drill Bit 2 x 100 mm,
- Quick Coupling Drill Bit 2.4 x 100 mm
- Quick Coupling Drill Bit 2.7 x 100 mm
- Hohmann Recator 6 mm
- Kirschner Wire 1.8 x 150 mm
- Plate Bender
- Periosteal Elevator Fiber Handle
- Plate and Bone Holding Forceps Ratchet Lock-Type1
- Plate and Bone Holding Forceps Ratchet Lock-Type2
- Reduction Forcep Pointed Tip Ratchet Lock
- Reduction Forcep Serrated Tip Ratchet Lock
- Screw Driver Hexagonal, Holding Sleeve, for 2.7 mm Locking Screws
- Screw Driver Torque for 2.4/2.7 mm Locking Screws
- Screw Driver Quick Coupling for 2.7 mm Locking Screws
- Sharp Hook
- T Handle Quick Coupling
- Tap for 2.4 mm Screws, Quick Coupling
- Tap for 2.7 mm Screws, Quick Coupling
- Graphics Aluminum Box with Silicone Fittings
Specifications
Product Video
Specifications
| 2.7 mm One Third Tubular Plate |
|---|
Product Video
