Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 4.5/5 mm Locking Medial Proximal Tibia Plate
- There are 4, 6, 8, 10, 12 and 14 holes on plates.
- Plates are available in both the left and right directions.
- Round and combi holes are present on the plate. Combination holes enable fixing with cortex screws for compression in the dynamic compression unit section and locking screws in the threaded section.
- In the threaded portion of the shaft, 5 mm locking screws are accepted; in the compression portion, 4.5 mm cortical screws or 5 mm locking cancellous screws are accepted. In the plate head’s distal locking holes, 5 mm locking screws or 5 mm locking cancellous screws are accepted.
- The individual fracture pattern can be addressed during implant placement with the 4.5/5 mm Locking Medial Proximal Tibia Plate.
- Two holes for K-wire preliminary fixation or plate head sutures for meniscal repair.
- Reduced bone-to-plate contact and preservation of the periosteal blood supply are benefits of limited-contact surfaces.
- The option to select different plate lengths eliminates the need to cut plates.
- Anatomically correct pre-contoured plate.
- available in stainless steel and titanium.
- Locking plates improve construction stability while lowering the chance of screw back-out and subsequent reduction loss. Additionally, it lessens the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- There is a full set of instruments for the 4.5/5 mm Locking Medial Proximal Tibia Plate. For this plate, general instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc. are available.
Uses of 4.5/5 mm Locking Medial Proximal Tibia Plate
- Locking 4.5/5 mm It is recommended to use the Medial Proximal Tibia Plate to support fractures of the medial tibial plateau caused by metaphyses, split-type fractures of the medial tibial plateau, medial split fractures with associated depressions, and fractures of the medial tibial plateau that are depression- or split-type.
- Additionally, segmental fractures of the proximal tibia as well as the proximal quarter (lateral and medial) of the tibia may be treated with the plate.
- The Plate can also be used to open and close wedge tibial osteotomies as well as fix medial proximal tibia and tibia shaft nonunions and malunions.
Instruments set of 4.5/5 mm Locking Medial Proximal Tibia Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 4.5/5 mm Locking Medial Proximal Tibia Plate |
|---|
Product Video
