Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 4.5/5 mm Locking Proximal Femoral Hook Plate
- 2, 4, 6, 8, 10, 12, 14, 16 and 18 holes are available for plates.
- Combination holes in the plate enable fixation using locking screws in the threaded section and cortex screws in the compression-related dynamic compression unit section.
- A cannulated locking measuring 7.3 mm can be inserted into the first proximal screw hole, which is 95 degrees from the plate shaft.
- In the second proximal screw hole, a 5 mm cannulated locking screw with a 110° angle to the plate shaft is accepted.
- The shaft holes can accommodate locking screws up to 5 mm in diameter in the threaded portion, 4.5 mm in the compression portion, or 5 mm in the threaded and cylindrical portions. 4.5 mm cortical screws or 5 mm locking screws can be inserted into the plate head’s distal locking holes.
- the lateral aspect of the proximal femur is roughly approximated by anatomical precontouring.
- Involving the greater trochanter’s superior tip are two proximal hooks.
- A construct that is angularly stable and independent of bone quality is made possible by the use of locking screws.
- accepts the articulated tension tool to tension the plate and build the load-sharing construct.
- 4.5–5.5 mm Locking Hook on the proximal femur Implant placement is made possible by plates by addressing each fracture pattern individually.
- The periosteal blood supply is preserved and bone-to-plate contact is decreased by limited-contact surfaces.
- Cutting plates is unnecessary when there is a variety of lengths available.
- Titanium and stainless steel options are both available.
- By reducing the chance of screw back-out and subsequent reduction loss, locking plates increase construct stability. Additionally, it minimizes the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- The 4.5/5 mm Locking Proximal Femoral Hook Plate is available with a full set of instruments. These general instruments include a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc.
Uses of 4.5/5 mm Locking Proximal Femoral Hook Plate
- The 4.5/5 mm Locking Proximal Femoral Hook Plate is used to treat femur fractures such as:
- trochanteric region fractures, including simple trochanteric fractures, cervicotrochanteric fractures, trochanterodiaphyseal fractures, multifragmentary pertrochanteric fractures, intertrochanteric fractures, reversed or transverse trochanteric region fractures, and medial cortex fractures in addition.
- combination of proximal femur fractures and ipsilateral shaft fractures.
- Metastatic proximal femur fracture.
- proximal femur osteotomies.
- Additionally for use in fixing osteopenic bone and malunions or nonunions.
- Fractures around the prosthesis.
Instruments set of 4.5/5 mm Locking Proximal Femoral Hook Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 4.5/5 mm Locking Proximal Femoral Hook Plate |
|---|
Product Video
