Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 4.5/5 mm Locking Proximal Tibia Plate
- There are 4, 6, 8, 10, 12 and 14 holes available for plates.
- Available plates in both the left and right directions
- There are both round and combi holes on the plate. The threaded section can be fixed using locking screws in combo holes, and the dynamic compression unit section can be compressed using cortex screws in combo holes.
- The shaft holes can accommodate locking screws up to 5 mm in diameter in the threaded portion, 4.5 mm in the compression portion, or 5 mm in the threaded and cylindrical portions. 5 mm locking screws or 5 mm locking cancellous screws can be inserted into the plate head’s distal locking holes.
- Implant placement is made possible with the help of a 4.5/5 mm Locking Proximal Tibia Plate.
- There are two holes for K-wire initial fixation or plate head suture meniscal repair.
- The periosteal blood supply is preserved and bone-to-plate contact is decreased by limited-contact surfaces.
- Cutting plates is unnecessary when there is a variety of lengths available.
- Plate with anatomical contours already built in.
- Titanium and stainless steel options are both available.
- By reducing the chance of screw back-out and subsequent reduction loss, locking plates increase construct stability. Additionally, it minimizes the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- For the 4.5/5 mm Locking Proximal Tibia Plate, an entire instrument set is available. These general instruments include a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc.
Uses of 4.5/5 mm Locking Proximal Tibia Plate
- Locking 4.5/5 mm Proximal Tibia Plate is used to treat fractures of the proximal tibia, osteopenic bone, tibial osteotomies, nonunions, and malunions, including:
- simple fractures with comminution.
- wedge fractures on the side.
- wedge fractures in the medial depression.
- Combination of lateral wedge and depression fractures in the bicondylar region.
- Fractures near the prosthetic.
- Associated shaft fractures and proximal fractures
Instruments set of 4.5/5 mm Locking Proximal Tibia Plate
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 4.5/5 mm Locking Proximal Tibia Plate |
|---|
Product Video
