4.5/5 mm Locking T Buttress Plate

Specification for 4.5/5 mm Locking T Buttress Plate

3, 4, 5, 6, 7, 8, and 10 holes are available for plates.
The plate has both round and combi holes. With locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression, combo holes enable fixation.
In the threaded portion of the shaft, the holes will accept 5 mm locking screws; in the compression portion, they will accept 4.5 mm cortical screws or 5 mm locking cancellous screws. The distal locking holes in the plate head will accept either 4.5 mm cortical screws or 5 mm locking screws.
Implant placement is possible to address each individual fracture pattern with 4.5/5 mm Locking T Buttress Plate.
Cutting plates is unnecessary if you choose from a variety of plate lengths.
pre-contoured plate that follows anatomical contours.
both stainless steel and titanium are readily available.
The risk of screw back-out and subsequent reduction loss is reduced by the locking plate, which also increases construct stability. Furthermore, it lessens the possibility of stripped screw holes and reduces the need for precise anatomic plate contouring.
For 4.5/5 mm Locking T Buttress Plate, a full set of instruments is available. The plate can be used with a variety of general instruments, including a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc.

The clavicle, scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, and fibula are among the bones that the 4.5/5 mm Locking T Buttress Plate is recommended for fixing fractures, osteotomies, and non-unions. This is true especially for osteopenic bones.

Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
List of all the instruments that hospitals, doctors, can get from us are as below :
Allen Key for Dill Bit Stopper
Countersink for 3.5 mm and 0.4 mm Screws
Depth Gauge Up to 60 mm measuring range
3.5 or 2.5 mmDouble Drill Guide
4.0 or 2.5 mm Double Drill Guide
2.5 mm x 125 mm Quick-Connect Drill Bit
2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
3.5 mm x 130 mm Quick-Coupling Drill Bit
3.5 mm drill guide Neutral and load position
3.5 mm Screw for Taking Out
Guide Sleeve for 1.2 mm K Wires
1.2 mm x 280 mm Guide Wire Threaded Trocar
12 mm Hohmann Retractor
3.5 or 2.5 mm Insert Drill Sleeve
6mm Periosteal Elevator Fibre Handle 6 mm
Plate Bender
Template for Bending Plates
Reduction Speed Lock Pointed Forcep 150 mm
Reduction Forcep Speed Lock with Serrated Jaws 150 mm
Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
Holding Forceps with a Screw
Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
Torque for 3.5 mm Locking Screws for a Screw Driver
Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
Strong Hook
Quick Coupling T Handle
Tap T Handle for Cortical Screws 3.5 mm
Tap T Handle for 4 mm Cancelous Screws
3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
Trephine
Graphics: Aluminium box with fittings made of silicone

Specifications

Product Video

Specifications

Product Video