Model No: 124433-A12
- Best Quality
- Affordable Pricing
- On-Time Delivery
- Customer Satisfaction
Specification for 5 mm Locking Condylar Femoral Plates
- There are 6, 8, 10, 12, 14, 16 and 18 holes on plates.
- Plates are available in both the left and right directions.
- Round and combi holes are present on the plate. Combination holes enable fixing with cortex screws for compression in the dynamic compression unit section and locking screws in the threaded section.
- In the threaded portion of the shaft, 5 mm locking screws are accepted; in the compression portion, 4.5 mm cortical screws or 5 mm locking cancellous screws are accepted. The distal locking holes in the plate head are compatible with both 7.3 mm and 5 mm locking cannulated screws.
- Implant placement is made possible by the 4.5/5 mm Locking Condylar Femoral Plate by addressing the specific fracture pattern.
- Reduced bone-to-plate contact and preservation of the periosteal blood supply are benefits of limited-contact surfaces.
- The option to select different plate lengths eliminates the need to cut plates.
- The distal femur’s contour is matched to the head’s anatomical shape, doing away with the need for intraoperative plate contouring.
- The plate shaft design allows for minimally invasive surgery.
- available in stainless steel and titanium.
- Locking plates improve construction stability while lowering the chance of screw back-out and subsequent reduction loss. Additionally, it lessens the chance of stripped screw holes and lessens the requirement for precise anatomic plate contouring.
- For 4.5/5 mm Locking Condylar Femoral Plate, a full set of instruments is available. For this plate, general instruments like a plate bending press, plate holding forceps, plate bending pliers, bone holding forceps, bone elevators, a bone cutter, a bone nibbler, a depth gauge, a sleeve, a screwdriver, a trocar sleeve, etc. are available.
Uses of 5 mm Locking Condylar Femoral Plates
- The use of a 4.5/5 mm Locking Condylar Femoral Plate, which aids in early mobilization and CPM, is an efficient method for treating supracondylar and intercondylar femur fractures. To sum up, in patients with severe bone comminution, meticulous open reduction and stable internal fixation with the supracondylar plate and lag screw combined with autogenous bone grafting provide a great opportunity to secure union with good limb alignment, joint congruity, and range of motion.
- Indications
- Multiple fractures of the distal femur can be buttressed.
- Fractures in the supracondyle
- Condylar fractures that occur both inside and outside of the joint
- Discrete femur malunions and nonunions
- Fractures around prosthetic devices
- osteopenic or normal bone fractures
Instruments set of 5 mm Locking Condylar Femoral Plates
- Entire instrument set is available with us. These Instruments are modified as per client’s requirements. These instruments can be used multiple times
- List of all the instruments that hospitals, doctors, can get from us are as below :
- Allen Key for Dill Bit Stopper
- Countersink for 3.5 mm and 0.4 mm Screws
- Depth Gauge Up to 60 mm measuring range
- 3.5 or 2.5 mmDouble Drill Guide
- 4.0 or 2.5 mm Double Drill Guide
- 2.5 mm x 125 mm Quick-Connect Drill Bit
- 2.8 mm x 165 mm, Drill Bit,Quick Coupling, Stopper
- 3.5 mm x 130 mm Quick-Coupling Drill Bit
- 3.5 mm drill guide Neutral and load position
- 3.5 mm Screw for Taking Out
- Guide Sleeve for 1.2 mm K Wires
- 1.2 mm x 280 mm Guide Wire Threaded Trocar
- 12 mm Hohmann Retractor
- 3.5 or 2.5 mm Insert Drill Sleeve
- 6mm Periosteal Elevator Fibre Handle 6 mm
- Plate Bender
- Template for Bending Plates
- Reduction Speed Lock Pointed Forcep 150 mm
- Reduction Forcep Speed Lock with Serrated Jaws 150 mm
- Self-Centering Bone Holding Forcep with Speed Lock, 190 mm
- Holding Forceps with a Screw
- Hexagonal Screw Driver with a Holding Sleeve and a 2.5 mm Tip
- Torque for 3.5 mm Locking Screws for a Screw Driver
- Quick-Connecting Screw Driver for 3.5 mm Locking and 3.5 mm Cortical
- Strong Hook
- Quick Coupling T Handle
- Tap T Handle for Cortical Screws 3.5 mm
- Tap T Handle for 4 mm Cancelous Screws
- 3.5 mm Threaded Drill Guide for 2.8 mm Drill Bit
- Trephine
- Graphics: Aluminium box with fittings made of silicone
Specifications
Product Video
Specifications
| 5 mm Locking Condylar Femoral Plates |
|---|
Product Video
